Rc Functions; Trim; Speed And 360 Degree Flips And Rolls - XciteRC Rocket 250 3D Mode D'emploi

• Place the Quadrocopter on a flat surface in the starting position and switch the transmitter on (5). Move
the left throttle lever all the way up and then back in the lowest position (6). This safety circuit prevents the
rotor may start after turning ON the Quadrocopter
EN
• The model is ready to fly as soon as a short beep is heard. The POWER LED of the transmitter and the
Quadrocopters LED lights up solid.
• If the flight battery runs low, the motor speed is reduced and the Quadrocopter sinks automatically. Find
a suitable place to land safely. Charge the flight battery again.

RC functions

Trim

Yaw trim

Speed and 360 degree flips and rolls

Speed: press the AUX1 button on the left side of the transmitter (1) during the flight and the Quadrocopter
becomes faster. The display switches fron EASY to PRO (2). Press the AUX1 button again to return to slower
speed.
20
RC functions · Trim · Speed and rolls
Forward/
Backward
trim
L . H
Left / Right
E A S Y
trim
%
XciteRC Rocket 250 3D