Turbosound iNSPIRE iP3000 Guide Rapide page 8

14 iNSPIRE iP3000
DFU Firmware Update
Where possible please update your iP3000 fi rmware using the iOS or Android app.
To update, go to the Settings screen in the app and look for the "CURRENT FIRMWARE" section. This section of the Settings screen will show the current
fi rmware version. If a fi rmware update is needed, the screen will display this option:
• • Swipe the update slider toward the right to initiate the fi rmware update. The update may take several minutes.
Update progress will be displayed on the app and the iP3000 speaker's DSP screen.
• •
Firmware Update Fallback Procedure
In the event you are unable to update the fi rmware using the iOS app, you may also carry out the update using this fallback procedure:
1. Download the .dfu fi le with the new fi rmware version to your smartphone.
2. Force your iP3000 speaker into DFU update mode by following these steps:
a. Power off the speaker.
b. Hold the ENCODER KNOB.
c. Power on the speaker. You will see the following screen:
d. Please select the option "Firmware upgrade" then press the ENCODER KNOB.
e. When you are successful, the DSP screen will show the system is ready for the fi rmware upgrade.
3. On your smartphone, select and hold the .dfu fi le until the smartphone off ers options for fi le transfer.
4. Select your smartphone's function for sharing via Bluetooth.
NOTE: Some smartphones need to be paired with the speaker before fi le transfer.
5. Select the iP3000 speaker for Bluetooth sharing (e.g., "HUAWEI P7-L07").
6. When the download begins, the DSP screen will show the download progress.
7. When the download is complete,the speaker will auto-restart and boot the new fi rmware.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualifi ed personnel with the required experience
and certifi cation to perform the necessary tasks. Walls, fl oors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory
used must be safely and securely fi xed both to the loudspeaker and to the wall, fl oor or ceiling.
When mounting rigging components on walls, fl oors or ceilings, ensure that all fi xings and fasteners used are of an appropriate size and load rating. Wall and
ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fi xing
arrangement can be safely employed for a particular load. Cavity plugs or other specialist fi xings, if required, must be of an appropriate type, and must be fi tted and
used in accordance with the maker's instructions.
The operation of your speaker cabinet as part of a fl own system, if installed incorrectly and improperly, can potentially expose persons to serious health risks
and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualifi ed and certifi ed (by local state or
national authorities) personnel prior to any installation or fl ying.
Make sure that speaker cabinets are set up and fl own by qualifi ed and certifi ed personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the
enclosed "Service Information Sheet", assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product.
Regular checks must be conducted by qualifi ed personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker
is fl own, the area underneath the speaker is free of human traffi c. Do not fl y the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic fi eld, even if not in operation. Therefore, please keep all materials that can be aff ected by such fi elds (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.
Quick Start Guide 15