Table des Matières
Publicité
9.4. Déclaration d'incorporation UE
EU Declaration of Incorporation
Manufacturer:
Universal Robots A/S
Energivej 25
DK-5260 Odense S Denmark
Description and Identification of the Partially-Completed Machine(s):
Product and
Industrial robot (multi-axis manipulator with AC or DC powered OEM controller)
Function:
Function is determined by the completed machine (with end-effector and intended use).
Model:
e-Series robots with either AC or DC OEM controllers:
UR3e OEM AC, UR5e OEM AC, UR10e OEM AC, UR16e OEM AC
UR3e OEM DC, UR5e OEM DC, UR10e OEM DC, UR16e OEM DC
Serial Number:
Starting
Incorporation:
Universal Robots e-Series OEM robots (UR3e, UR5e, UR10e and UR16e) shall only be put
into service upon being integrated into a final complete machine (robot system, cell or
application), which conforms with the provisions of the Machinery Directive and other
applicable Directives.
It is declared that the above products, for what is supplied, fulfil the following directives as detailed below:
When this incomplete machine is integrated and becomes a complete machine, the integrator is responsible for determining that
completed machine fulfils all applicable Directives and update the harmonized and other standards.
I. Machinery Directive
2006/42/EC
II. Low-voltage Directive 2014/35/EU
III. EMC Directive 2014/30/EU
IV. RoHS Directive 2011/65/EU
V. WEEE Directive 2012/19/EU
Reference the Harmonized Standards Used, as Referred to in Article 7(2) of the MD & LV Directives and
Article 6 of the EMC Directive:
(I) EN ISO 13732-1:2008,
Reference to Other Technical Standards and Specifications Used:
(I)
ISO 9409-1:2004
The manufacturer, or his authorised representative, shall transmit relevant information about the partly completed
machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas, certificate #DK008850.
Odense Denmark, 1 September 2019
Name:
Universal Robots A/S, Energivej 25, DK-5260 Odense S, Denmark
CVR-nr. 29 13 80 60
OEM Control Box
(in accordance with ISO/IEC 17050-1:2010)
Person in the Community Authorized to Compile the Technical File:
David Brandt
Technology Officer, R&D
Universal Robots A/S, Energivej 25, DK-5260 Odense S
2019
5
0
00000 and higher
year
Sequential numbering, restarting at 0 each year
e-Series
3 = UR3e, 5 = UR5e, 0 = UR10e
The following essential requirements have been fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.2.6, 1.3.4, 1.3.8.1, 1.5.2, 1.5.10, 1.7.2, 1.7.4, 4.1.2.3
It is declared that the relevant technical documentation has been compiled
in accordance with Part B of Annex VII of the Machinery Directive.
Reference the Low-voltage Directive.
Reference the EMC Directive.
Reference the RoHS Directive 2011/65/EU.
Reference the WEEE Directive 2012/19/EU
(II) EN 60204-1:2006/ A1:2010,
as applicable
(II) EN 60320-1:2001/ A1:2007
(II) EN 60664-1:2007
(II) IEC 60664-5:2007
Effective 1 September 2019
(II) EN 61140:2002/ A1:2006
as applicable
(II) IEC 61784-3:2010
ISO 14664-1:2015
UR5e and UR10e manipulators (not
controllers)]
Roberta Nelson Shea
Phone +45 8993 8989
Fax +45 3879 8989
22
9. Certificats
Original EN
[SIL2]
[Class 5 for UR3e,
info@universal-robots.com
www.universal-robots.com
Guide d'installation
Publicité
Table des Matières
