Safety Instructions - PAW MW 20 Notice De Montage Et D'utilisation

2 Safety instructions

2 Safety instructions
The installation and commissioning of the solar station as well as the connection of electrical
components require technical knowledge commensurate with a recognised vocational
qualification as a fitter for plumbing, heating and air conditioning technology, or a profession
requiring a comparable level of knowledge [specialist]. The following must be observed during
installation and commissioning:
Relevant local and national prescriptions

Accident prevention regulations of the professional association

Instructions and safety instructions mentioned in this manual

Personal injury and damage to property!
The hydraulic separator must only be used in hydronic heating closed-loop
systems filled with heating water according to VDI 2035 / Ö-Norm H 5195-1.
The hydraulic separator must not be used in domestic water applications.
NOTICE
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant
properties are lost. We do not assume liability nor provide warranty for damage to property
resulting from sealants damaged in this way.
 It is imperative to avoid that EPDM gets in contact with substances containing mineral
oils.
 Use a lubricant based on silicone or polyalkylene and free of mineral oils such as
Unisilikon L250L and Syntheso Glep 1 of the Klüber company or a silicone spray.
2008/08
CAUTION
993x421-mub-ml – V04 B-3