Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION (continued):
SLIP FITTER INSTALLATION
Please refer to Table 1 for torque spec on all bolts/screws.
Note: Adjustable angle is 0-90º
1. Remove the bracket mounting screws on the fixture and run the wires through the bracket. (Fig. 1)
2. Install the bracket on the fixture and tighten the bolt to spec. (Fig. 2)
3. Loosen the bolts on the bracket, connect the wires correctly, and pull the wires into the pole. (Fig. 3)
4. Place the bracket over the pole and tighten the bolts to spec (Fig. 4)
1
3
Fixture
Slip Fitter
EiKO Global, LLC • 23220 W. 84th St, Shawnee, KS 66227 • (P) 1-800-852-2217 • (F) 1-800-492-8975 • eiko.com
EiKO Canada • 81 King St, Barrie, Ontario L4N 6B5 • (P) 1-705-721-5189 • (F) 1-705-721-7855 • orderdesk@eiko.com
Adjusting
Locking
Bolt
Wires
Pole
2
4
Bolt
Fixture
Adjustable
0-90º
Slip
Fitter
Pole
Publicité
