Publicité
Les langues disponibles
Les langues disponibles
9
USER PROGRAMMING
User programming is possible through the menu,
which can be opened by pressing the SET key on
the illuminated display panel. To exit the menu at
any time without making any changes, press the
STOP key. In any case, if the keys are not pressed
for about 1 minute, the system will automatically
exit the menu to show the stove status. To scroll
the various menus use the TEMP+ and TEMP-
keys, to open the displayed menu, press SET.
9.1 Date and Time Settings
Press SET to open the incorporated calender
setting menu. The day of the week can be
changed from Monday to Sunday, as well as the
time and date. To switch between the variables,
use the PROG+ and PROG- keys, and to change
the values, use the TEMP+ and TEMP- keys. To
confirm the changes and exit, press the SET key.
9.2 Weekly Programmer
The programmer is only active in the automatic
operating mode (AUTO on the display). There
are 30 settable programming levels for on
and off times, the temperature and operating
programme. Each programme can be disabled
without needing to be cancelled, by following a
very simple procedure. Press SET to open and
scroll the various programmes, or the TEMP+ and
TEMP- keys to scroll the variables to be changed.
Then use the PROG+ and PROG- keys to set the
required values.
9.3 Program Number
Indicates the selected programme, from 1 to 30.
9.4 Day of the week
Indicates the day of the week of the displayed
programme. A setting can be made for each day,
from Monday to Sunday (Mo,Tu,We,Th,Fr,Sa,Su)
or else for all work days from Monday to Friday
(MF), or else for weekends from Saturday to
Sunday (SS). This system allows the setting of a
single programme to turn the stove on or off every
day, from Monday to Friday, at the same time.
9.5 Hours
Stove on or off hour
9.6 Minutes
Stove on or off minutes
9.7 Required Temperature
For ignition programmes, the requested ambient
temperature must be set between 5 and 30°C.
9.8 Requested Programme
For ignition programmes, the requested heating
programme must be set between 1 and 5.
9.9 Program Type
Set either an ignition programme, ON, or power off
programme, OFF.
9.10 Enabling the Program
This function is essential, because if in the disabled
position (No A.) the system will not control the
programme and the programme function may not
be executed.
9.11 Example of Programming
To programme the stove so that it turns on every
day from Monday to Friday at 8.30am at level 5,
with a temperature of 20°C, proceed as follows
after opening the ignition programme setting.
•
With TEMP+ select MF as the ignition days from
Monday to Friday.
•
Select the Hour using the PROG+ key and set 08
with the TEMP+ and TEMP- keys.
•
Select the minutes using the PROG+ key and set
30 with the TEMP+ and TEMP- keys.
•
Select the temperature using the PROG+ key and
set 20° with the TEMP+ and TEMP- keys.
•
Select the heating power using the PROG+ key and
set 5 with the TEMP+ and TEMP- keys.
•
Select the mode using the PROG+ key and set ON
with the TEMP+ and TEMP- keys.
•
Select the programme type using the PROG+ key
and set Enab. with the TEMP+ and TEMP- keys.
•
Press SET to save the data and insert a new ignition
programme. If programming is complete, press
STOP to exit.
•
Remember to set the operating mode to Automatic
to enable control of the weekly programmer.
10 STOVE PARAMETERS
Press SET to open and modify the main stove
parameters such as pellet load, flue gas extraction
speed, ambient air fan and ambient temperature
correction. Using the TEMP+ and TEMP- keys it is
possible to change the stove setting percentages
to correct its operation based on the pellets used.
Then press SET to confirm the modified parameter
and save it in the memory. Use the PROG+ and
PROG- keys to scroll the parameters. Press the
STOP key to exit the menu.
10/2021 - EN
21
Publicité
