TUBESCA-COMABI NEOLIUM BOX 200 Notice De Montage Et D'utilisation page 60

3-1-8. Assembling the stabilisers
1. The 4 stabilisers are attached to the uprights between the 1
th
11 rungs.
2. Lock the stabiliser clamp on to the upright using a wing nut.
Repeat steps 1 and 2 a further 4 times.
3.
1
Check "stabiliser length" and "stabilizer width" by following table §3-8-2
106-A000035566 - ind.D - 11/2021
C.
3
st
and 2
2
nd th
rungs, and the 10 and
Ensure that the clamp
is locked in place.
Ensure that
the clamp
is locked in
place.
60