Installation And Instruction Manual; General Description; Contents Of The Pack; Minimum Requirements - Astrel Group Energy Meter 1 RC Manuel D'installation Et Mode D'emploi

EN

Installation and instruction manual

1.

General description

The Energy Meter 1~ RC is a wireless power metering device with data transmission for Elios4you Smart systems. It can replace one of the
Elios4you Smart measurement transformers (CT), or it can be used to monitor the power drawn by a load (e.g. household electrical appliance
or storage system). If the Energy Meter 1~ RC is used for remoting a CT of the Elios4you Smart, there will be no substantial differences in the
information displayed internally of the App. If the device is used for monitoring a load, the App will display the amount of power consumed
instantaneously by the load.

Contents of the pack

1 x Energy Meter 1~ RC
9
1 x current transformer (CT)
9

Minimum requirements

Elios4you Smart
9
Free "Elios4you" App updated to the latest version available
9
2.

Safety warnings

All hardware connections must be made by a person who is suitably qualified and aware of the risks associated with installation, observing
the requisite standards of safety, and with the equipment isolated from the power supply. The user accepts all responsibilities and risks
connected with the steps of installing, configuring and using products to the end of obtaining the benefits and advantages they afford. The
liability of the Astrel Group in respect of its products is regulated by the Astrel Group General Conditions of Sale (published on the company's
website www.astrelgroup.com).
Do not disassemble, open up or attempt to repair the product. Opening up a sealed component has the effect of invalidating the warranty.

Caution

The Energy Meter 1~ RC takes readings of alternating current (AC); it cannot be used to monitor storage systems on the direct current (DC)
side. Up to 3 Energy Meter 1~ RC devices can be paired with each Elios4you Smart, one for each reading mode envisaged (Production /
Transfer / Other).
3.

Installation

Prior to installation

1) Check that the distance at which the Energy Meter 1~ RC (also 'Energy Meter RC' in this manual) is installed from the load will be
compatible with the radio range indicated in the technical specifications. Caution: the radio range between the two devices will
48,3 mm
62 mm
53,5 mm
Fig. 1
19 18 17 16 15 14 13 12 11
L N
LED
1 2 3
12
Button
4 5 6 7 8 9
Fig. 2