Dell 2400MP Manuel Du Propriétaire page 23

control to make adjustments to a setting.
To go back to Main Menu, go to BACK tab and press Enter button on the control
panel or the remote control.
To exit the OSD, go to Exit tab and press Enter button on the control panel or the
remote control.
Main Menu
Input Select
S-V —Press ENTER to detect S-Video signal.
IDEO
C V —Press ENTER to detect Composite Video signal.
OMPOSITE IDEO
Auto-Adjust
Set Up
H. K —Adjust image distortion caused by horizontal shifting of the
EYSTONE
projector orientation.
A S —Select ON (the default) to
UTO OURCE
autodetect the available input signals.
When the projector is on and you press
SOURCE, it automatically finds the next
available input signal. Select OFF to lock
the current input signal. When OFF is
selected and you press SOURCE, you
select which input signal you want to use.
VGA—Press ENTER to detect VGA
signal.
Select to show "Auto Adjustment in
Progress..." information.
Using Your Projector 23