ELAC SUB3070 Consignes D'utilisation page 6

Installing Bottom Plates and Spikes
The SUB3070 comes with two steel bottom plates as well as a spike set that must be installed prior to use.
Please follow the below steps when unpacking and setting up the subwoofer. Due to the weight of the
subwoofer we highly suggest having a second person assist with this process.
1. Carefully unbox and remove the subwoofer from the box. Due to the weight of the subwoofer we highly
suggest using a second person. Place the subwoofer upside down on a soft non-abrasive surface.
2. Locate and place the steel bottom plates on the bottom of the subwoofer (The screw holes only line-up one
way) and secure with the supplied screws.
3. Now screw in the spikes as shown in the below diagram.
4. If you are installing the subwoofer on carpet, carefully turn the subwoofer over and adjust for the spikes to
level the subwoofer. You will need to use the metal locking caps to lock the spikes into place once leveled.
5. If you are installing the subwoofer onto hardwood, tile or other non carpet surfaces please use the supplied
spike discs to prevent any damage to your floor.
ELAC SUB 3070 Subwoofer | www.elac.com | Page 5