EcoFlow RIVER Pro Extra Mode D'emploi page 6

3. Battery Warning Indicator
When the battery malfunctions, try to resolve the issue by restarting the product.. If the Battery Warning In-
dicator keep flashing, please contact the customer support team. Do not charge the unit.
4. Battery Level Indicator
The battery level is indicated by five lights. When the product is being charged, the lights will flash in se-
quence. When the battery is malfunctioning, all five lights will flash together at the same time.
5. Low Temperature Indicator
When the ambient temperature is too low (below -4 /-20 ), the blue low temperature warning light will
flash. Please move the product to a location with a suitable temperature for the product to function normally.
When the ambient temperature is below 0
warning light will flash as well. Please move the product to a location with a suitable temperature for the
product to charge normally.
6. Power Button
Press and hold the Power Button 1 second to turn the RIVER Pro Extra Battery on and off. When the RIVER
Pro Extra Battery is turned on, the display will light up. When the RIVER Pro Extra Battery is running, you can
switch on or off the display screen by pressing the Power Button once. When the RIVER Pro Extra Battery is
connected to the RIVER Pro, its standby time will follow the current settings of the RIVER Pro.
RIVER Pro Connect with RIVER Pro Extra Battery
Get the RIVER Pro, RIVER Pro Extra Battery and Expansion Power Cable ready. Power off both the RIVER
Pro and RIVER Pro Extra Battery before attempting to connect them together. If the products are not turned
off, they cannot be successfully connected. Then follow the steps below.
1. Open the Expansion Port cover below the AC port of the RIVER Pro to access the Expansion Power Port.
Connect the Expansion Power Cable to the port. Tighten the screws on both sides of the port to secure the
connection.
2. Open the Expansion Port cover of the RIVER Pro Extra Battery to access the Expansion Power Port. Con-
nect the free end of the Expansion Power Cable to the RIVER Pro Extra Battery Expansion Power Port. Tight-
en the screws on both sides of the port to secure the connection.
3. Turn on the power button of the RIVER Pro or RIVER Pro Extra Battery. If the display of the RIVER Pro
shows the extra battery icon, the connection is successful. Fully charge the products for the first time and en-
sure the voltage is consistent to maximize the performance.
2
while the product is being charged, the blue low temperature