Hama 00042570 Mode D'emploi page 6

00042570bda 30.10.2008 14:30 Uhr Seite 6
L L OPERATING INSTRUCTION
No more time-consuming plugging and unplugging, no more tangled cables:
once connected all units are linked with one another.
The video switching console enables you to record a satellite program while
watching television via your normal TV antenna.
Four Scart and two RCA sockets offer a wide range of individually selectable
combinations. To switch over, you simply press a button, and monitoring is possi-
ble during recording.
Applications:
The Video Selector is a switching console that is suitable for stereo operation
and permits three video sources to be connected by way of Scart plugs. The
Scart output is via the TV monitor socket. You can copy from input B or C to input
A, and an additional monitor switch permits viewing of one of the sources at
input A, B or C. Three video recorders or camcorders can be connected to one
TV set, and a Hi-Fi system via the RCA sockets.
Connect the Video Selector to your video equipment via Scart cables. The video
recorder with which recordings are to be made must be connected to input A.
Satellite receivers, pay-TV decoders (d-Box, Premiere), DVD-Player, video recor-
ders, camcorders, video games consoles, etc. can be connected with one of the
other ports.
Set your TV set to AV.
Select Line input on the recording video recorder.
With the button "VIEW" A, B or C, select the input you want to view on the con-
nected TV set.
If you wish to copy from one of the inputs B or C to the video recorder connected
to A, press the button "RECORD B" to "A" or "RECORD C" to "A". If you do not
wish to copy, slightly touch the unused button (B-A or C-A) until both buttons are
released.
If you want to process RGB signals with your AV Selector, set the button "RGB"
to "ON"; otherwise, leave it in the "OFF" position.
6