ELAC S10.2 Consignes D'utilisation page 6

Connecting your Subwoofer
If you are connecting the subwoofer to an AV Receiver or Pre-Amp with a dedicated subwoofer or LFE output,
connect an RCA cable (not supplied) from the LFE/Subwoofer output on the AV Receiver/Pre-Amp to the Left
RCA input on the subwoofer (Fig 1).
If you are connecting the subwoofer to a stereo pre-amp or AV Receiver without a dedicated LFE/Subwoofer
output, connect a set of stereo RCA connectors to the left and right RCA inputs on the subwoofer. If you are
using a pre-amp with only one set of pre-outs, use a splitter for each output on the pre-amp and connect two
sets of stereo RCA cables to both the amplifier and to the subwoofer (Fig 2).
ELAC S10.2 Subwoofer | www.elac.com | Page 5