Publicité
Les langues disponibles
Les langues disponibles
EN
Main functions of the keys
The 6 frontal keys allow accessing commands and settings of the device and change their function according to the operating mode of the
video intercom.
The keys can be used in two different ways:
1) short pressure
Function of keys in stand-by mode
Door Lock release of the last external door station
from which the call was received
Activation/deactivation of office function if enabled
>3 sec.
Auto switch-on of the last external door station from
which the call was received
Mute/Unmute.
When Mute icon
>3 sec.
Call user 1 or Activation device 1
Settings / User adjustings
>3 sec.
Call user 2 or Activation device 2
Call user 3 or Activation device 3
Call user 4 or Activation device 4.
If more than 4 users and/or devices are stored, with a
long pressure of button 4 (>3 seconds) you will access
directly their list
Users or devices list.
To call a user or to enable a device it is necessary to
select it from the list with arrow up
>3 sec.
down
(button3) and press
A n n u l l a
S a l v a
N o n s a l v a r e
+
System Programming
>3 sec.
Attention: the first 4 users or devices of the Users and devices list can be directly called or activated pressing buttons "1", "2", "3" or "4"
on the videointercom.
If there are more than 4 users, it is necessary to press for a long time button 4 (>3 seconds), on the screen appears the complete list of
stored users and devices; to make a call select the desired user with buttons
If button 4 is pressed for a long time (> 3 sec) during the call or during conversation, the list that appears consists of:
- "Camera" item which, by pressing the button
door station camera with that one coming from the auxiliary camera (if present and programmed) and/or from the video modulators
whose addresses have been previously configured in the external door station;
- (in conversation only) the "Mute" option to close the microphone;
- only from User and Device list entries whose addresses are actuator addresses.
If button 4 is pressed for a long time (> 3 seconds) during the auto switch-on phase (before entering the conversation), the displayed list
will contain the item "Camera" and all the items of the Users and devices list whose addresses are those of an actuator or of an external
door station/modulator.
UP TO
4 U
SERS OR DEVICES
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
Attention. During the pressure of a key, the dissuasion or busy tone indicates that the function is not available because the service is
not active or the video intercom line is busy by another user.
Function of keys with OSD ON. Menu selection.
Move cursor left - back - exit
A n n u l l a
S a l v a
N o n s a l v a r e
Move cursor up
A n n u l l a
N o n s a l v a r e
S a l v a
Move cursor down
A n n u l l a
S a l v a
N o n s a l v a r e
Move cursor right - forward - OK
A n n u l l a
S a l v a
N o n s a l v a r e
2) long pressure (over 3 seconds).
flashes
(button 2) or
A n n u l l a
S a l v a
N o n s a l v a r e
(button 4)
A n n u l l a
S a l v a
N o n s a l v a r e
(button 4) several times, allows to switch the video signal coming from the external
A n n u l l a
S a l v a
N o n s a l v a r e
1
2
3
4
Function of keys on call and during conversation
Door Lock release
Answer/Hang up
Mute/Unmute.
>3 sec.
When Mute icon
Activation device 1 only with actuator address
Audio level adjustment (conversation only)/Bright-
>3 sec.
ness/Contrast/Color
Activation device 2 only with actuator address
Activation device 3 only with actuator address
Activation device 4 only with actuator address.
If there are more than 4 entries with an actuator ad-
dress in the Users and devices list, with a long pressure
of button 4 (>3 seconds) you will access directly their list
List consisting of the Camera entry which allows
switching the external door station image with that
coming from the modulators (if present) and only the
>3 sec.
entries in the Users or devices list with actuator ad-
dress. To call a user or to enable a device it is necessary
to select it from the list with arrow up
down
(button3) and press
A n n u l l a
S a l v a
N o n s a l v a r e
and press
;
A n n u l l a
A n n u l l a
A n n u l l a
S a l v a
S a l v a
S a l v a
N o n s a l v a r e
N o n s a l v a r e
N o n s a l v a r e
MORE THAN
4 U
SERS OR DEVICES
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
C
ALL OR ACTIVATION USER OR DEVICE
NAME LIST
>3 SECONDS
flashes
(button 2) or
S a l v a
A n n u l l a
N o n s a l v a r e
(button 4)
S a l v a
A n n u l l a
N o n s a l v a r e
1
2
3
4
SELECT THE NAME
Mi 2538/1
CALL
- 11 -
Publicité
