KIKKA BOO AMAIA Manuel page 8

THANK YOU FOR CHOOSING OUR PRODUCT. BEFORE USING THIS BABY STROLLER PLEASE READ THE FOLLOWING INSTRUCTIONS
CAREFULLY AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNINGS
•This stroller in the design of babies age of 0-36 months and weight less than 15Kg.
•The stroller must be assembled by adults,.
• Check that the pram body attachment devices are correctly engaged before use.
• The parking device shall be engaged when placing and removing the children.
• Picking the baby up from the seat/sleeping basket rst, then use the elevator or climb the stairs.
• Max bearing capacity of the storage basket 3Kg; Max bearing capacity of the whole stroller is 15Kg; Max bearing capacity of the cup
holder: 0.5Kg.
• Only replacement parts supplied or recommended by the manufacture/distributor shall be used.
• Never leave your child unattended.
• Ensure that all the locking devices are engaged before use.
• To avoid injury ensure that your child is kept away when unfolding and folding this product.
• Do not let your child play with this product.
• Use a hardness as soon as your child sit unaided.
• This seat unit is not suitable for children under 6 months.
• Always use the restraint system.
• This product is not suitable for running or skating.
• Any load attached to the handle and/or the back of the backrest and/or on the sides of the vehicle will a ect the stability of the vehicle.
• The vehicle shall be used only for up to 1 baby at a time.
• Maximum thickness of the mattress is 2cm.
• Accessories without the approval of the manufacture shall not be used.
• Use the wrist safety belt to avoid the stroller accident slip out of hand.
• KEEP AWAY FROM THE FIRE!
I. PARTS: 1. Push handle; 2. Folding bar; 3. Shopping basket; 4. Rear wheel brake pedal; 5. Rear wheel; 6. Front wheel; 7. Front wheel
orientation; 8. Safety belts; 9. Armrest; 10. Canopy;
II. PACKAGE CONTENTS: 1. Canopy; 2. Armrest; 3. Front wheels: 4. Rear wheels; 5. Frame; 6. Sleeping basket;
Before installation, please check all parts are included in the package. For any missing or defective parts, please contact the customer
service immediately. To guarantee the service life of the stroller, please use it correctly under the instructions and make a thorough
inspection regularly.
III. UNFOLD THE STROLLER
Adjust the push handle to the position as shown in the Figure1. Switch o the folding lock (Figure 2). Grab the handle and pull it upward
to spread the frame out. The stroller is fully unfolded when you hear the "click" sound (Figure 3).
IV. INSTALL THE FRONT WHEELS
Lift the front frame up and fully insert the front wheel into the mounting hole beneath the frame. Repeat the step for the other front
wheel (Figure 1, 2).
Before usage, please pull the front wheels downward to check whether they are properly installed.
ENGLISH