Télécharger Imprimer la page

Dometic MK140 Instructions De Montage Et De Service page 6

Boîte à fusibles avec convertisseur

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Scope of delivery
A
NOTICE!
 Do not expose the device to a heat source (such as direct sun-
light or heating). Avoid additional heating of the device in this
way.
Electrical cables
!
CAUTION!
 Lay the cables so that they cannot be tripped over or damaged.
A
NOTICE!
 If cables have to be guided through metal walls or other walls
with sharp edges, use ducts or bushings to prevent damage.
 Do not lay cables which are loose or bent next to electrically
conductive material (metal).
 Do not pull on the cables.
 Do not lay the 230 V mains cable and the 12/24 V DC cable in
the same duct.
 Fasten the cables securely.
1.3
Operating the device safely
!
WARNING!
 Operate the device only if you are certain that the housing and
the cables are undamaged.
 Always disconnect the power supply when working on the
device.
A
NOTICE!
 Make sure the ventilation grilles in the device are not covered.
 Ensure good ventilation.
2
Scope of delivery
 Fuse box with transformer
 Installation and operating manual
6
MK140
EN

Publicité

loading