Dometic MK140 Instructions De Montage Et De Service page 11

MK140
9 Troubleshooting
Fault
The 230 V and 12 V outputs
are not being supplied in
mains operation.
12 V outputs are not being
supplied in mains operation.
12 V outputs are not being
supplied in battery operation.
10 Warranty
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
EN
Cause
The mains power has been
disconnected.
The automatic fuse (main
switch, fig. 1 1 or 2, page 3)
has shut off.
The 12 V vehicle plug-in fuse
(fig. 1 4, page 3) is defec-
tive.
The circuit breaker (fig. 1 3,
page 3) has tripped.
The 12 V vehicle plug-in fuse
(fig. 1 4, page 3) is defec-
tive.
The battery has not been
connected to the fuse box
with transformer correctly.
Troubleshooting
Remedy
Reconnect the mains power.
Switch it on again.
Replace it with a vehicle plug-
in fuse (15 A) of equivalent
quality.
Press the circuit breaker to
switch it on again.
Replace it with a vehicle plug-
in fuse (15 A) of equivalent
quality.
Connect the battery correctly.
11