User Guide; Outdoor - Albrecht DV 300 GP Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

25. Multiple languages
You can select between English, Japanese and Chinese.
26-28:
These options appear when you open the setup menu (9). You have to insert
the SD card which is used in the camera. The settings you make are saved to
this memory card. The camera will assume these settings as soon as it is
powered up with this SD card.
26. Time Zone:
With this option can program the correct time zone into your camera.
27. SBAS (Satellite Based Augmentation System)
These systems support the reception of the GPS signal and increase the
accuracy. The standard GPS accuracy of 10-20m is increased to about 1-6m.
28. Disable Warning:
With this option you disable the warnings (3 short beeps) for low power and
running out of memory.

5 User Guide

Before you start using the camera for the first time you should install the supplied
video player. To do this please insert the CD into your computer and start setup.exe.
Then follow the instructions which will guide you through the installation. For the next
step you need a microSD card with a transfer rate of 6MB/s or above and a card
reader. This is achieved by memory cards with level 6 or above. Now connect your
card reader to your computer and insert the memory card. You are now able to enter
the setup menu in the video player. Please select the correct time zone and other
options you wish to enable. These settings are saved to the memory card. Now insert
the memory card into your camera. At the next startup the camera will apply all saved
settings.

5.1 Outdoor

1. Insert the Micro SD card on which you saved the settings from the video player.
2. Press the Power on button for about 1 second, you will hear one short beep.
(The lights will flash once in this order
3. Now the camera will start searching for a GPS signal. All LED will switch off
except the GPS signal light which will flash in blue regularly (
Once the camera finds the GPS signal you will hear two short beep tones and
the camera will start recording.
The GPS light (blue
) and the record light (red
.)
).
) will keep flashing.
7

Publicité

Table des Matières
loading

Table des Matières