Publicité
Les langues disponibles
Les langues disponibles
General Power Tool
Safety Warnings
(Cont'd.)
tional starting. Ensure the switch is in
the off-position before connecting to
power source and/or battery pack, pick-
ing up or carrying the tool. Carrying
power tools with your finger on the
switch or energising power tools that
have the switch on invites accidents.
adjusting key or wrench before turning
the power tool on. A wrench or a key
left attached to a rotating part of the
power tool may result in personal
injury.
Do not overreach. Keep prop-
er footing and balance at all
times. This enables better
control of the power tool in unexpect-
ed situations.
Do not wear loose clothing or jew-
ellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
vided for the connection of dust
extraction and collection facilities,
ensure these are connected and proper-
ly used. Use of dust collection can
reduce dust-related hazards.
this product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness, tin-
gling, or pain occur, and consult a
physician.
1. Wear ear protectors with
impact drills. Exposure to
noise can cause hearing
loss.
2. Use auxillary handle supplied with
the tool. Loss of control can cause
personal injury.
3. Always work in a well-
ventilated area. Wear an
OSHA-approved dust
mask and safety glasses.
4. Keep hands away from rotating parts.
5. Use clamps or another practical way
to secure the workpiece to a stable
platform. Never hold work in your
hand, lap, or against other parts of
your body when operating tool.
Prevent
TOOL USE AND CARE
uninten-
power tool. Use the correct power tool
for your application. The correct power
tool will do the job better and safer at
the rate for which it was designed.
Remove
any
power tool if the switch does not turn
it on and off. Any power tool that can-
not be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive
safety measures reduce the risk of
starting the power tool accidentally.
Dress
properly.
power tools out of the reach of chil-
dren and do not allow persons unfamil-
1. Side handle
2. Depth gauge
If devices
3. Clamping lever
are pro-
4. Hammer/Drill lever
5. Lock button
6. Switch
7. Forward/Reverse lever
8. Chuck
Do not
9. Power cord
misuse
10. Chuck key holder
Tool Features
iar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the
hands of untrained users.
tools. Check for misalignment or bind-
ing of moving parts, breakage of parts
Do not
and any other condition that may
force the
affect the power tool's operation. If
damaged, have the power tool
repaired before use. Many accidents
are caused by poorly maintained power
tools.
Do not
use the
tools sharp and clean. Properly main-
tained cutting tools with sharp cutting
edges are less likely to bind and are
easier to control.
tool, accessories and tool bits etc. in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
Store
1. This tool must NOT be modified or
idle
2
8
4
3
2
1
3
DG190600CK and DG190625DI
used for any application other than
that for which it was designed.
7
6
5
8
www.chpower.com
Maintain
power
Keep
cutting
Use the
power
10
9
Publicité
