Configurations Menu; Alarm Menu; Indication Of Presence Of A Fault - Tecumseh INFINEE Manuel D'utilisation

Configurations menu

This menu allows the setting of operating parameters.
Only accessible using the "Developer" password.
These functions are described in the software specification document.

Alarm menu:

An alarm is triggered by the PLC software.
The list of alarms, their triggering conditions and the unit's behaviour in the event of an alarm are
shown in a table in Appendix.

Indication of presence of a fault

An alarm is indicated:
By a visual alert, illumination of the flashing
long as the alarm is present.
In case of an alarm, the alarm menu can be accessed to identify the current alarm by simply pressing
The following display appears and identifies the source of the alarm.
This display provides the following information:
•
An alarm identification code
•
The date and time the alarm appears
•
A description of the alarm (on two lines)
•
To facilitate the diagnosis, and depending on the type of alarm, additional information
is stored in the memory. This information is displayed on the last two lines.
The red LED of the alarm button will be active if at least one alarm is present. This LED will flash when
a new alarm is present. After you learn of the alarms, the red LED will be fixed.
The buzzer will also activate when an alarm is activated. This can be stopped by pressing the alarm
button.
An alarm is reset:
From the main screen, access the list of alarms present. A long press on this button will reset this
alarm if the condition has disappeared.
Version: 2020-01
Control User Manual
light and an audible sound, which are all present as
TECUMSEH EUROPE S&L
2 av. Blaise Pascal, 38090 Vaulx Milieu
Tel. : +33 (0)4 74 82 24 00 - www.tecumseh.com
INFINEE chillers
ENGLISH - 22 -