Troubleshooting; Technical Specifications; Electrical Wiring - Caterlite GH439 Mode D'emploi

UK

Troubleshooting

If your Caterlite appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The appliance is not working

Technical Specifications

Model Voltage
GH439 220-240V
50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.
4
Probable Cause
The appliance is not switched on Check the appliance is plugged in correctly
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Heating element has expired
Power Current
1580-1800W 7.2A
and switched on
Call Caterlite agent or qualified technician
Replace the plug fuse
Check power supply
Call Caterlite agent or qualified technician
Call Caterlite agent or qualified technician
Maximum Dimensions
bread width h x w x d (mm)
35mm approx. 200x280x286
Action
Weight
3.1kgs