tiko Energy Solutions K-Box A7 Mode D'emploi page 7

K-Box A7 User's Manual
Step 1 Remove power from the electrical panel.
Step 2 Verify that there is no tension on the K-Box clamps.
Step 3 Remove the cover panel. Unwire and remove the device.
Step 4 Put the cover panel back. Ensure that no electrical contact can be
touched.
Step 5 Power on the system.
Step 6 If the device remains property of tiko Energy Solutions AG or
its authorized reseller, it must be returned. Otherwise, the
ultimate disposal of a device shall be handled according to
national laws and regulations.
tiko Energy Solutions AG
English
Uninstalling
7 / 44
IM-0005-0004 Rev. 7