QEO FMR 800-M/C Mode D'emploi page 29

BULLDOZER - MODE
ACCURACY SELECTION - BULLDOZER - MODE
fine
standard
coarse
Tilt
accuracy
±0,5 °
±1,5 °
±2,5 °
BULLDOZER - MODE ON/OFF
Power On the receiver.
Press the „bulldozer - mode" button to activate
or deactivate the bulldozer - mode.
Press Power On/Off button and bulldozer -
mode button simultaneously.
The individual LEDs of the segment
„left / level / right" light up in succession.
Release the buttons when the LEDs indicate
the desired accuracy.
REMARK
This accuracy setting is for blade tilt only.
For setting the accuracy of the height indication
Please refer to chapter
„ACCURACY SELECTION - HEIGHT INDICATION"
Page 27
EN
29