Publicité
Les langues disponibles
Les langues disponibles
Recipes
BlueRhino.com/recipes
Assembly Instructions
1
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.800.762.1142 toll-free. Please have
your owner's manual and model number available for
reference.
Note: The model number can be found on the back or side of the grill.
Assembly Tips:
1. Select an area where you will assemble this product. To
protect components, choose a smooth surface that's free of
cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first. Then, before
completing each step, go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or
strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak Detection Solution (instructions on how to make
solution are included in "Operating Instructions" section).
• (1) 14.1 oz or (1) 16.4 oz LP gas tank (not included).
Typical assembly is approximately 30 minutes.
3
Attach Handle, Heat Plate Supports and Igniter
D
F
x4
Need help? 1.800.762.1142
Do not return to place of purchase.
x 4
H
x 1
I
x 4
Replacement Parts
parts.BlueRhino.com
1.800.762.1142
2
Attach Legs
B
x 4
E
4
Attach Burner, Heat Shield, Igniter Wire, Wind Guard and
Regulator/Control Valve
Note: The holes at the end of the burner are required for proper air intake and should
not be obstructed. Propane will not leak out from these holes.
Note: Once attached, the regulator/control knob will freely rotate to accomodate for
the LP gas tank.
C
x 1
G
x 4
x 4
J
x 4
G
x 1
J
x 1
5
Publicité
