Publicité
Les langues disponibles
Les langues disponibles
Programming
A maximum of 60 transmitters can be taught-in. If 60 transmitters have already been
taught-in to the receiver, no further transmitters will be accepted, and the codes already
learnt will not be lost. The first transmitter taught-in determines which coding scheme
will be valid. Only 12-bit, 18-bit or Keeloq transmitters can be taught-in. This means that
if the first coding learnt was for example 18-bit, then only transmitters with 18-bit coding
can be taught-in. Another coding can be taught-in after first deleting all existing transmitters.
Every transmitter switch can be set for different operating modes on all channels. For
instance, any switch can control the "Off" function for all channels. The same also applies
for the external switch.
Operating modes
Impulse:
The output is activated as long as the selected transmitter switch is actuated.
Surge:
The condition of the output changes with every actuation of the transmitter switch.
On/Off:
One transmitter switch is allocated the "On" or "Off" function.
Transmitter switch / Teaching-in switches
Mode
Programming
Press "SET" switch 1 x briefly
Impulse
Actuate the transmitter switch for 3 s. flickers
Press "SET" switch 2 x briefly
Surge
Actuate the transmitter switch for 3 s. flickers
Press "SET" switch 3 x briefly
On
Actuate the transmitter switch for 3 s. flickers
Press "SET" switch 4 x briefly
Off
Actuate the transmitter switch for 3 s. flickers
When a radio signal has been recognised, the "OUT" (Pos. 3) flickers and the output
is activated. The switch input is taught-in like a radio channel. Select the operating
mode with the "SET" switch of the required channel, then actuate the connected switch.
An "asymmetrical" coding must be set for transmitters with
a coding switch! Setting all coding switches to "ON" or "OFF"
will lead to a loss of function or incorrect function!
"OUT" LED display
flashes 1 x - Pause - flashes 1 x ...
flashes 2 x - Pause - flashes 1 x ...
flashes 3 x - Pause - flashes 1 x ...
flashes 4 x - Pause - flashes 1 x ...
4
!
Publicité
