b'Twin Cargo Bike R500E Notice D'utilisation page 8

SCREEN AND CONTROL ELEMENTS
Screen data and function
11
5
Power assistance mode (0-1-2-3):
1
«0» no assistance is the default mode.
Each mode corresponds to the maximum assistance levels defined below:
Mode
Maximum assistance
level**
Average autonomous
range***
2
3
4
5
6
7
8
7
3 4
0 - off
No assistance
/
ON/OFF button:
Switch the electrically-assisted bicycle on and off by holding the button down for a few seconds.
Scroll through the route information (TRIP, ODO, TRIPtoGO) with a short press.
«+» button:
Step up to the higher power assistance mode by briefly pressing the button
«-» button:
Step down to the lower assistance mode
Lighting button
The lighting on the bicycle can be switched on and off by briefly pressing the button
Go to the settings by holding the button down for a few seconds
Speed indicator**
Trigger for «Pedestrian» mode and starting aid:
For walking beside the bicycle in walk assist mode, up to 6 km/h, without pedalling.
Please note that the trigger only works when the assistance is in mode 1, 2 or 3
ODO: Records the total distance travelled. It cannot be reset to zero.
TRIP: Records the partial distance travelled.
TRIPtoGO: Remaining distance that may be covered with the power assistance mode.
2
POWER
NORMAL
ECO
ODO TRIP
to GO
1 13 8 9
1 - eco
+90% assistance
6
KM / H
12
10
KM
2 - normal
+180% assistance
50 - 90 km
3 - Power
+300% assistance