Section 1. Safety Information - Jandy Laminar Jet JLLED4C Serie Manuel D'installation Et D'utilisation

Section 1. Safety Information

IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
READ AND FOLLOW ALL INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed, including the
following:
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION. This Laminar Jet with LED light must be
installed by a licensed or certified electrician in accordance with the National Electrical Code
applicable local codes and ordinances. In Canada, the Canadian Electrical Code and all applicable local
codes and ordinances must be adhered to. Improper installation will create an electrical hazard, which
could result in death or serious injury to pool or spa users, installers, or others due to electrical shock,
and may also cause damage to property. Read and follow the specific instructions below.
Before installing this Laminar Jet with LED light, read and follow all warning notices and instructions
accompanying this product. Failure to follow safety warnings and instructions can result in severe injury,
death, or property damage. Visit www.jandy.com or call (800) 822-7933/ (888) 647-4004 (Canada) for
additional free copies of these instructions.
ATTENTION INSTALLER: This manual contains important information about the
installation, operation and safe use of this product. This information should be given
to the owner/operator of this equipment.
• Do not connect system to an unregulated city water system or other external source
of pressurized water producing pressures greater than 35 PSI.
• Pressurized air in system can cause product failure or also cause the filter lid to be
blown off which can result in death, serious personal injury, or property damage. Be
sure all air is out of system before operating or testing the equipment.
The maximum operating pressures for pumps, filters, and other equipment are
specified in their individual installation/operating instructions. Never subject the system
to test or operating pressures exceeding these specifications. Pressures above
maximum component operating ratings can cause product failure or cause the filter lid
to be blown off, or other equipment failures which can result in death, serious personal
injury, or property damage.
Jandy Laminar Jet | Installation and Operation Manual
®
WARNING
WARNING
WARNING
WARNING
WARNING
ENGLISH
Page 3
ENGLISH
and
®