Publicité
Les langues disponibles
Les langues disponibles
FILTRES SOUFFLES TOP
TOP BLOW MOULDED FILTERS
5. PRECAUTIONS FOR USE
Cut off the electricity supply.
▪ The filter works under pressure; any air ingress into the system can cause the explosion of one of the components,
resulting in a risk of serious injury or of damage to the equipment.
▪ Always stop the pump before manipulating the 6-way valve.
▪ In order to avoid any deterioration of the pump and to optimise the usage of the filtration system, it is imperative to clean
the skimmer basket and the pump pre-filter on a regular basis (
▪ Never allow the pump to operate without water and with the valves fully closed.
VALVE
FONCTION
FILTRATION Normal filtration and return to the pool:
Water suction by the skimmer
Circulation through the pump then through the
sand filter
Return to the swimming pool through the
delivery nozzle
WASH
Cleaning the sand through back-washing (~3).
Used when:
- The pressure gauge reading increases by 0.4
bars compared with the initial reading
- Loss of power at the delivery nozzle
RINSE
After
a
wash:
Allows the sand to be repositioned and remaining
impurities to be removed
15 Rue des Marais 44310 ST Philbert de Gd Lieu – Tel. 02 40 59 95 35 – www.acis-france.com
valves in closed position, pump stopped).
VALVE
DRAIN
CIRCULATION No filtration, water suction from the pool towards
valve
cleaning
CLOSED
FUNCTION
No filtration: water suction from the pool towards
Drain
Used to reduce the level of water in the swimming
pool when it is too high
Delivery. Allows an improved dissemination of
treatment products around your swimming pool as
these do not have to pass through the sand
Only to be used if you wish to treat your water
Stops any circulation
Mandatory position for cleaning the pump pre-filter
9
Publicité
