Ultrasport 331100000022 Manuel D'utilisation page 19

www.ultrasport.net
GB
LEVELLING THE CYCLE
For security and stability, your Cycle has a factory welded frame and once fully assembled correctly,
should not need further alignment. However, in the interest of safety, please always ensure that your
Cycle is positioned on a solid, flat surface. If necessary, use a rubber mat underneath to reduce the
possibility of slipping in use. If you need to make a fine adjustment, simply twist the end of either Rear
Frame Stabilizer Adjustable Hex End Cap to compensate for uneven floors.
ASSEMBLY DIMENSION:
The foot print for this product is L860 mm x W460 mm
The assembled weight is 15 kg
The free area shall be not less than 0.6 m greater than the training area in the directions from which the
equipment is accessed. The free area must also include the area for emergency dismount. Where
equipment is positioned adjacent to each other the value of the free area maybe shared.
0.6 M
0.6 M 0.6 M
EXIT
ENTRANCE
18