lauson CL608 Mode D'emploi page 4

INITIAL STARTING-UP
MAINS CONNECTION
Adapter connect to DC power jack (output 5V 0.5~1.0A) to drive the product.
AMPLIFIER CONNECTION
Connect audio plugs to Alert input on your mixer or amplifier:
 Red plug into R/H channel input.
 White plug into L/H channel input.
PLAYING A RECORD
-
Place the record of your choice on the turntable. If it is a 45rpm, do not forget
to place the adapter on the record spindle.
-
Choose the desired playing speed using the Speed select switch between 33.
45 and 78rpm.
-
Turn on the Rotary Power Switch.
-
Release the tone arm lock.
-
Push in the arm with your hand lightly.
-
Place the stylus vertically over the first track of the record the
turntable will start turning automatically.
-
Put down the cartridge slowly to the record then the turntable will play.
-
When a record comes to the end, the turntable will stop automatically if the
Auto-stop switch is in the ON position. If the switch is in the off position then
it will be suitable for Long Play records
USB/SD recording
-
Place the record of your choice on the turntable. If required, do not forget to
place the adaptor on the record spindle.
-
Choose the desired playing speed using the speed selection switch between
33.3, 45 and 78rpm.
-
Turn on the Rotary Power Switch, note that this also controls volume.
-
Release the tone arm lock.
- usb or sd encoding only turntable.
- Insert the usb or sd, long press REC key .speaker bite tips shows that start
recording.
- When you stop the turntable or then press REC botton, the recording will stop,
speaker horn sound of ding-ding two tips
EN
4