Percentage Weighing - Adam LBK Serie Notice D'utilisation

• Press [Func] to exit and go back to the normal weighing mode.

5.4.2 PERCENTAGE WEIGHING

• In the weighing mode, press [Func] key twice to access the percentage
weighing mode, the display will show "PER".
• Press [Zero] key to set the reference sample value, the display will
show "SE ".
• Place the item to be set at 100% on the pan, and press [Zero] Key
when the stability indicator comes on.
• The display will show "100.0%".
• When another item with a different weight value is put on the pan, the
relative % value would be shown against the initial reference sample
value.
• Press [Func] key to exit and go back to weighing mode.
5.4.3 CALIBRATION
• Refer to section 7 for details
© Adam Equipment Company 2014