Publicité
Les langues disponibles
Les langues disponibles
Attaching / removing the dust collector
1.
Make sure that the lower part of the dust collector is at the same height as the
protruding part of the vacuum cleaner. When both are at the same height,
press the dust collector against the device until you hear a clicking sound.
2.
To remove the dust collector, press the release button on the dust collector.
Attachment of accessories and storage
1.
Insert the long crevice nozzle and the round brush into the built-in suction
opening of the device. To remove, simply pull.
2.
After cleaning, the housing and accessories can be attached to the holder as
shown in the illustration.
EN
19
Publicité
