BEHA PB Manuel page 50

USE OF THE APP
Programming the heater with BEHA Bluetooth App control:
The App is available for Android and iPhone Smartphones and Tablets and can only be used locally, not for
remote control. The purpose of programming and controlling the set temperatures of a heater is to save energy
cost, e.g. by lowering the room temperature during night time.
When using the app, you have two possibilities:
> TEMPERATURE
Setting of wanted room temperature.
> PROGRAMME
Creating a weekly programme by setting different room temperatures for each day of the week at different
hours based on when the room is vacant or not.
> Each single heater can also be controlled manually by setting the wanted room temperature on the thermostat
wheel. In that case the heater will leave the pre-set programme.
> After power outage the heater will go back to the set temperature and programme it had when the power
outage occurred. To get back to the correct temperature/time setting, open each heater in the app and press
SAVE CHANGES. The heaters will receive correct time from the app.
> When saving a programme in the heater electronics the phone must be within reach of the heater.
DOWNLOAD THE "BEHA Bluetooth Heater" APP ON YOUR PHONE
> For Android phones go to Google Play
> For iPhone go to App Store
Search for BEHA Bluetooth Heater. Download the App.
DESCRIPTION OF THE THERMOSTAT FUNCTIONS
> This button is used for connecting the heater to the app.
> When a selected heater is within range the blue light comes on.
> The white light is on when the temperature is controlled from the app.
24/7
HOW TO CONNECT A HEATER TO THE APP
Activate Bluetooth on your phone/tablet:
Android: Go to Settings > Connect > Bluetooth > On
iPhone: Go to Settings > Bluetooth > On
Switch on Bluetooth
Select BEHA Bluetooth Heater
Android telefon
The heater within range will connect to
the app via Bluetooth. Press "Add new
heater" in the app.
50
GB
iPhone