Aftershokz OpenComm Mode D'emploi page 8

Talk time
Bluetooth working frequency range:
®
Battery capacity
Charge voltage
LED Indicator
Solid red
Solid blue
06
Flashes red and blue
NFC Function ( Near Field Communication)
Headset support NFC pairing.
1. Power on the headphones or set to pairing mode.
2. Position the NFC sign area of the headset close to the NFC detection area of mobile device.
3. Blue light will flash one time when headset is paired successfully, and OpenComm will say "connected".
Moisture Detection Alarm
Headset has a moisture detecting function. If moisture is present on the charging port while being charged, the headset will vibrate with
an audible "beep" warning.
16 hours Standby time
2402MHz~2480MHz Warranty
170 mAh Maximum RF output power
5V±5% Water resistant
Charging Flashes blue
Flashes red
Charging complete
Pairing mode
Up to 14 days
2-year
4 dBm
IP55
Incoming call
Low battery
NFC sign area