Publicité
Les langues disponibles
Les langues disponibles
CHECKLIST.
You're 50% there.
Make sure the connector isn't
plugged into the socket.
Tip:
Don't throw out the box
containing the fan, but use it
to store the fan at the end of
the season.
Need help?
Call 010 798 89 99
Coolblue.nl/en/customer-
service
Follow all instructions as described here and
only use the included parts. Always let experts
handle repairs, or the warranty will be voided
and we won't be liable. That would be a waste
of your purchase. Coolblue isn't liable for any
injury, damage, or bad hair days as a result of
incorrect installation.
CBL1175/CBL1176
1.
ASSEMBLING THE STAND
Place the extension piece
of the fan
1
motor onto the stand
and attach it to the
2
bottom with the 4 screws
.
6
Make sure the cutouts on the stand
2
the extension piece
fit together.
1
Rotate the fan motor
clockwise to attach
3
it to the extension piece
.
1
4.
FAN BLADES
Push the fan blades
onto the motor axle
8
of the fan motor
as far as you can.
3
Make sure that the 2 pins of the motor axle
fit into the grooves of the fan blades
8
2.
GRILLE ATTACHMENT
Remove the grille attachment
motor axle by rotating it counter-clockwise.
and
5.
FAN FASTENER
Attach the fan blades
with the fan
8
fastener
by rotating it counter-
9
clockwise.
.
Check if the fan blades
can rotate freely
8
by rotating them manually.
3.
REAR GRILLE ATTACHMENT
from the
Place the rear grille
4
pins on the fan motor
Attach it with the grille attachment
rotating it clockwise.
6.
FRONT GRILLE ATTACHMENT
Open the grille closure ring
Place the grille closure ring
rear grille
.
5
Put the front grille
11
and fasten the closure ring
on the designated
5
.
3
by
4
by 3mm.
10
around the
10
on the rear grille
5
10
.
Publicité
