Transmitters; Handheld Microphone Uh-816; Body-Pack Microphone Upl; Instruction For Changing Battery - ExPelec SENRUN EP-890 Serie Manuel Utilisateur

Transmitters

Handheld Microphone UH-816

6 5 4
① Microphone Head Gril: Prevent damage and to reduce wind and breath noise.
② Aluminium House
③
Battery Compartment: 1.5V x 2 pcs
④
Channel Selector: Set wireless channel from 1 to 16.
⑤ Battery Indicator: Flashes when batteries are low.
⑥ Power Switch

Body-pack Microphone UPL-83

①
External Antenna
②
Power Indicator
③ Mini XLR Microphone Input Jack.
④ Volume Control: Control the body-pack microphone volume.
⑤
Power Switch
⑥ Channel Selector: Set microphone channel from 1 to 16.
⑦ Battery Compartment: 1.5V x 2 pcs.
Options: Headset or Iavalier microphone.
Note: Remove the batteries as well as switch off if you plan to not use the transimitter for a long period time.
7
2 1
3

Instruction for Changing Battery

① Switch the power off before changing batteries.
② Take out screws on battery plates and take the batteries out (see diagram
③
Match the pole with color, refer to diagram
Diagram
Red
We do not recommend you change the battery yourself, without the proper tools you may damage
the product.

Main Unit EP-890 Specifications

Model
Speaker
Output power
Recevier Module
Frequency response 70Hz~20kHz (3dB)
7
T.H.D
Charge time
Battery life
Power supply
Dimensions
Weight (N.W)
, and it's subequent slot and replace batteries.
Black
EP-890
4 Ω / 8" woofer, 4 Ω / 1" horn
150W(MAX), 110W(RMS)(Class-D Amplifier)
UHF PLL 16 channel true-diversity receiver module
(up to 4 pcs optional receiver)
<1%
6-8 hours
8 hours(depends on volume)
AC: 100-240V AC switching power supply
Battery: 12V/5Ah(2pcs)Lead acid battery
Optional: Lithium batteries
270 x 480 x 280 (W x H x D)
10.7 kg (with lead acid batteries)
9.5kg (with lithium batteries)
)
8