Audio Player With Remote Control; Main Control - ExPelec SENRUN EP-890 Serie Manuel Utilisateur

Audio Player with Remote Control

① Display
② Infrared Receiver
③ : Play/Pause
④
: Change the EQ mode【 Normal → Classic → Pop → Jazz → Rock】; press it longer to switch to the
repeat mode【Normal → Repeat One → Repeat All → Random】.
⑤ Backward: Press to go back to previous music.
⑥
Forward: Press to go next music.
⑦ : Press button to stop the current audio file; it's also a key to switch USB, SD card, BT function.
⑧ : Active the recording function.
⑨
Indicator: When red light is flickering, it means ready to record. Red light indicates recording. Green
light indicates audio is playing and when the light is off, it means there is no music playing.
⑩ Remote Control: Press key ［VOL-］/［VOL+］, LCD display "VOL xx", the "xx" indicates volume.
⑪
SD Card Port
⑫
USB Port
⑬ Numbers: Selecting music, press number 2, the LCD shows"0002", press it one more time then playing
begin with"0002". If it enters with a number out of selection, it will remain to play current music track.
5

Main Control

1 2 3
9 10 11 12
① Main Volume: Control the overall volume (microphone and audio).
② Treble: Control the treble level.
③
Bass: Control the bass level.
④ CD VOL: Control CD volume.
⑤ LINE IN VOL: Control Line In volume.
⑥
Echo: Control echo level on both wireless and wired mic.
⑦
MIC 1 VOL: Control wired MIC 1 volume.
⑧ MIC 2 VOL: Control wired MIC 2 volume.
⑨ Battery Level Indicator
⑩
DC Input Socket
⑪ USB Recharge(5V/1A).
⑫ Extension Speaker Output: Connect an external woofer / tweeter speaker via this output.
⑬
Mix Out: Connect another PA system or recording system with an RCA and 3.5 mm via this output.
⑭
LINE IN: Connect an audio with a RCA and 3.5mm via this input.
⑮ MIC 1 /MIC 2: Connect a wired microphone with a XLR and a 6.3mm jack via this input.
4 5 6 7
13 14
8
15
6