Bushnell BACK TRACK POINT 3 Guide De Démarrage Rapide page 9

Changing the Distance Units
• to change the units from imperial to metric, QUiCK preSS of both the MarK and MOde/pOwer buttons
at the same time when any of the three location icons are selected the distance units display changes from "yd"
to "m". the Backtrack will automatically switch from yards to miles (or meters to km) for longer distances. it can
display up a maximum distance of 999 miles or kilometers.
Turning on the Backlight
• pUSH MarK to turn on the display backlight at anytime. it will automatically turn off about 30 seconds later.
Auto Power Off
• Power automatically turns off after 5 minutes if no buttons have been pressed, or HOLd down MOde/pOwer
to turn off manually. when the Backtrack is turned back on, it returns to the last mode you selected.
in any
Location
Mode
pUSH
QUiCK preSS both MOde/pOwer and
MarK to select imperial or metric units for
displayed distance (yd & mi or m & km)
Other Operations
pUSH
pUSH MarK to
activate backlight
9