Work Light - Bell Aire 3000 Mode D'emploi

BellAire™ Model 3000 Tire Inflator Instructions • Mode d'emploi du gonfleur de pneu BellAire™ Modèle 3000
7. Make certain the inflator power switch is in the off position. See #1 in figure 1.
8. Set emergency brake and start vehicle engine. See "Warning: Vehicle Exhaust Without
Proper Ventilation", page 4.
9. Plug inflator lighter plug into vehicle 12 Volt cigarette lighter socket.
NOTE: When the nozzle is connected correctly, wait 5-7 seconds and the gauge will indi-
cate the current inflatable item's pressure. Always follow the manufacturer's inflation pres-
sure recommendations to avoid over-inflation. If the inflatable item is over-inflated, press
the deflation bleeder valve button to release air until pressure gauge indicates the correct
pressure. See #8 in figure 1.
The pressure gauge on the inflator is for reference only and is therefore not binding for
exact values. While inflating, the gauge is a measurement of the fluctuating pressure be-
tween the inflatable item and the high pressure hose.
When inflating items requiring 10 PSI (0.69 bars) or less, inflate in short bursts and check by
feel or by a reliable measuring device to determine accurate pressure.
10. Turn on inflator power switch to the on position. See #1 in figure 1. The BellAire™
3000 will now inflate your inflatable item to the pre-set pressure level and then shut
off automatically. After pre-set auto shut-off has taken place, turn inflator power
switch to the off position. See #1 in figure 1.
11. To stop inflator before reaching the pre-set auto shut-off pressure, turn inflator power
switch to the off position. See #1 in figure 1.
12. Remove air hose nozzle from inflatable, remove adapter needle from air hose nozzle
by turning the adapter needle counterclockwise, and return air hose and adapter
needle to their storage locations on inflator.
13. Unplug inflator from vehicle 12 Volt cigarette lighter socket and store cord in its stor-
age compartment.
14. Turn off vehicle.
USING THE LED WORK LIGHT:
1. The flexible LED work light (see #5 in figure 1, page 3) is operated with a separate
light switch. See #2 in figure 1. The light can be used by itself or used while inflating
to illuminate the work area.
2. Position the work light for best directional lighting of your work area.
All manuals and user guides at all-guides.com
6