Samsung EB-U1200 Guide De Démarrage Rapide page 7

2. When the mobile device is fully charged, remove the mobile
device from the battery pack.
•
Do not place the mobile device on the battery pack
when conductive materials, such as metal objects,
magnets, credit card, transportation card or a key card
are placed between the mobile device and the battery
pack. The mobile device may not charge properly or
may overheat, or the mobile device or the cards may
be damaged.
•
When conductive materials are placed on the battery
pack, noise may occur from the battery pack.
•
The charging time may vary depending on the charging
conditions.
•
You cannot use the fast charging feature when
you use the cable charging and wireless charging
simultaneously.
•
When the charger is connected, you can use both the
cable charging and wireless charging. However, when
the cable charging is complete, you can use wireless
charging feature with the remaining battery power. If
the battery power is low, the wireless charging feature
may be disabled.
•
If you make a call during wireless charging, connectivity
problems may occur. You must first remove the mobile
device from the battery pack.
7