Remote Control - Kalorik Rvc 46588 Mode D'emploi

• Switch on the appliance and press the START/STOP button on the
remote.
• When the Robot Vacuum is working properly, the light in the power
button will stay orange. Pressing the power button or turning off the
power will stop the appliance.
• Refer to the REMOTE CONTROL section to select the desired
sweeping modes.
Ionic Air Purifier Function
The robot vacuum comes with an Ionic Air Purifier function, which is
activated when the Robot Vacuum is sweeping.
IMPORTANT:
Please switch off the power when appliance will no longer be
‒
used.
The Robot Vacuum should not start vacuuming while it is being
‒
charged.

REMOTE CONTROL

The remote control functions differently depending on which of the
below modes the robot vacuum is in. You can switch between the
modes using the Start/Pause button.
Standby mode: The vacuum is on but paused.
‒
Operating mode: The vacuum is in on and sweeping.
‒
www.KALORIK.com
8
RVC 46588 - 200501