Led Indicator; Support - Atlantis A02-SGE Guide De Démarrage Rapide

If the BIOS section of your computer's boot program is Plug-and-Play compliant, then
at power-up the BIOS will automatically configure any newly installed the Gigabit
Ethernet Card.

3.4 LED Indicator

LED
Link/ACT
1000M

4. Support

For technical questions and support, please contact our help-desk by ticket on
http://www.atlantis-land.com/ita/supporto.php.
Due to a fault in some Plug-n-Play BIOS programs, it
happens occasionally (A02-SG32) that a newly
installed adapter is assigned an Interrupt Number
which is already assigned to another device. In such a
case, the conflict of Interrupt Number will cause faults
in the behavior of both devices. Then it is necessary
to run the CMOS Setup utility, and manually assign a
non-conflicting Interrupt Number.
This indicator blinking green will be transmitting or received
data on the network.
This indicator lights green when the Gigabit Card is
connects to 10/100/1000Mbps Gigabit Ethernet Network.
22
MEANING