Axis Communications P3365-V Guide D'installation page 16

5. Insert the SD memory card (optional).
6. Attach the camera unit to the mounting bracket using the two M4x8 screws provided.
Note
Adjust the Lens
1. Lines to help with horizontal alignment
2.
Locking screw
Open the Live View page (see Access the Product, on page 17) in the web interface and make the
following adjustments to the camera:
1. Loosen the locking screw.
2. Turn the lens to the desired position. Make sure the lines on either side of the lens are
aligned horizontally. Ensure that the mark on the lens cover, between the horizontal
lines, is facing up.
3. Once satisfied, gently tighten the locking screw to secure the camera's position.
4. Open the Focus Adjustment page in the web interface under Setup > Basic Setup >
Focus & Zoom, and follow the on-screen instructions. Use the image window to adjust
the focus and zoom. See the online help files for more information.
Note
• Due to the dome's refraction, the image may appear slightly out of focus once the dome
has been placed. To correct this go to the Focus Adjustment page in the Web interface
under Setup > Basic Setup > Focus & Zoom, and adjust the focus again.
• Adjusting the focus and zoom manually can damage the lens.
AXIS P3365–V Fixed Dome Network Camera
1
16
2