WerkaPro 10725 Mode D'emploi page 9

5. Assembly
 Take 2 connections from the upright joints (B)
 Take 2 lateral shelf supports (D)
 Insert the 2 supports (D) between the 2 connections of the uprights (B) at the
desired height.
Use a mallet if necessary with a piece of wood for the operation.
 Make sure that the elements are well fitted inside the slots.
 Repeat the operation
 Assemble the 2 sides by installing the shelf supports (C)
 Add the central shelf supports (E)
 Add the feet and end caps (G) to the 4 feet and to the top of the shelf.
 Make sure all brackets are properly seated in the slots.
 Install the connections (F) of the upright joints at the top.
 Fit the pieces together correctly over the connections (F) and the uprights (B).