Creating Combination Fixtures In The Field; Figure 1 Beacon And Loudspeaker Combination Fixture - Federal Signal Global Serie Consignes D'installation Et De Maintenance

Installation and Maintenance Instructions

Figure 1 Beacon and loudspeaker combination fixture

T
he proprietary coupling system allows for simple and cost effective, wiring from
product to product often eliminating the need for expensive Ex wiring practices and
Ex rated glands. The E-box is available only when factory installed on an Ex d unit
or when used as a E-box spacer adjoining an existing E-box. Please refer to the
accessories listed on page 18 for available options. When creating certain fixture
combinations, it is necessary to replace the end caps of E-box before mounting
the product. If you are creating combination fixtures, refer to instruction manual
25500259 for specific instructions and details.
A note about combination fixtures: If the product is Ex db marked only, it is for
use in gas atmospheres. If the product is Ex db e marked, it uses the increased-
safety terminal enclosures and is only for gas atmospheres. If the product is Ex tb
marked, it is for installation in dust atmospheres.
Mounting the Loudspeaker
ATTACH THE LOUDSPEAKER SECURELY: To prevent injury, this apparatus
must be securely attached to the mounting surface in accordance with the
installation instructions. Use installer-supplied fasteners suitable for the
mounting surface.
Model G-SPK Global Series Loudspeaker
8