Operation; Attaching The Precision Measuring Bar To The Sct - Bosch SCT 410 Notice Originale

4.

Operation

4.1 Attaching the precision measuring
bar to the SCT 410
1. Place the precision measuring bar on the angle
mounting bracket.
Fig. 2: Positioning the precision measuring bar
2. Slide the star knob screw through the hole of the
angle mounting bracket and the precision measuring
bar.
Fig. 3: Positioning the star knob screw
1 Star knob screw (within the scope of delivery of the
SCT 1415 S2)
Robert Bosch GmbH
1
Operation | SCT 410 | 13
3. Place the clamp with the hexagon screw on top of
the thread of the star knob screw.
1
Fig. 4: Placing the clamp on the thread of the star knob screw
1 Clamp with hexagon screw
4. Fasten star knob screw.
1
2
1
4512002-18_shd
Fig. 5: Fastening the clamp
1 Arrestor cable for clamp
2 Cylinder screw (M5 x 12)
3 Washer (M5)
5. Use the snap spring to secure the enclosed arrestor
cable for the clamp (Fig. 5, item 1) to the clamp.
6. Use the screw to fasten the arrestor cable to the
angle mounting bracket (Fig. 5, item 2).
 The clamp is now secured from falling off.
en
3
|
1 690 386 066 2017-08-11