Ice And Water Dispenser / Ice Maker Install And Uninstall - Forno FFRBI1844-36SB Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Tips
The ice maker will work normally only when its sensor detects the environment temperature to reach-13°℃.
When the first time the refrigerator is plugged-in,after 8-24 hours(depending on the amount of food stored in the
refrigerator), the ice maker will start to work normally when it is at ON position. After the ice maker has been
working for 72 hours, the storage tray will be full of ice-cube.
Make ice
The ice maker and ice storage box are arranged at the upper part of freezing chamber. When using the ice maker,
please make sure that the ice maker switch is turned on and the water system is connected, and the ice maker will make
ice automatically; when the ice storage box is full of ice, the ice making process will stop automatically.
The ice maker can make about 1,500g of ice every 24 hours.
When the freezing chamber reaches the set temperature, the ice maker can make the first batch of ice just for several
hours.
CAUTION:
When the ice maker is making ice cubes, you may hear the beep from water valve, flowing sound of water into ice
maker, and falling sound of ice cubes.
The catch basin shall be cleared timely to prevent water from spilling to destroy the floor.
Ice and water dispenser
• Touch "ICE CUBES" button, if [
the glass cup, and ice cubes will come out.
• Touch "ICE CRUSHING" button, if [
with the glass cup, and crushed ice will come out.
• Touch "ICE WATER" button, if [
the glass cup, and cold water will come out.
Ice maker install and uninstall
lt is suggested to remove the ice maker, clean, and then install when it is used for the first
time or for a long time.
Please power off the refrigerator before removal.
Take out the ice storage box ,lift forcibly with both hands, and then pull it out;
Clean, dry and then install.
When installing the ice storage box , align the bottom with the rails at both sides, put into
the rails, and then push;
] indicator comes on, press and hold ice discharge button with
] indicator comes on, press and hold ice discharge button
] indicator comes on, press and hold ice discharge button with
13

Publicité

Table des Matières
loading

Table des Matières