SilverCrest SGKT 50 A1 Manuel D'utilisation page 161

KEYPAD BEEP
Press the  or  multifunction control buttons [16] to enable or disable the keypad beep. To save
the selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the
"SAVED" message will appear for a few seconds on the display [17].
LANGUAGE
Set the menu language for the base as follows:

Press the  or  multifunction control buttons [16] to select the desired language (e.g.
"ENGLISH") from the list.

Press the Menu/OK button [15] to confirm your selection.

A confirmation beep will sound and the "SAVED" message will appear for a few
seconds on the display [17].
SETTINGS
This menu allows you to perform more settings for the base.
DIAL MODE
There are two different options you can use.
TONE
Tone dialling is the most popular dialling method nowadays.
PULSE
Pulse dialling is normally used with older devices.
Press the  or  multifunction control buttons [16] to select the desired option. To save the
selected setting, press the Menu/OK button [15]. A confirmation beep will sound and the "SAVED"
message will appear for a few seconds on the display [17].
RECALL
You can use the Recall/Flash function with the Menu/OK button [12] on your handset or the Calls
list button [20] on the base during a phone call. You can use it during a call for switching to an
internal conversation or to forward the call when using the device with a PBX. The Recall/Flash
function of the handset or base will cause a short, temporary line interruption.
The following options are available:
SHORT
100 ms interruption.
SilverCrest SGKT 50 A1
English - 159