Maintenance; Troubleshooting - MAXXMEE KLW-042B-EU5 Mode D'emploi

EN
• Make sure that the device is not connected to the mains
power.
• Wipe down the device with a soft, damp cloth.
• Store the device in a clean, dry place so that it is protected
and is out of the reach of children and animals when it is
not in use.

MAINTENANCE

The device must be kept operational. The combination fi lter (7)
has to be replaced regularly (approx. every 2 to 3 months). The
intervals at which the combination fi lter has to be replaced de-
pend on the air quality and the frequency of use of the device.

1. Remove the front cover (5) from the housing (4).
2. Pull the combination fi lter (7) out of the unit by the loop.
3. Insert a new combination fi lter into the device.
4. Place the front cover on the magnets (8).

TROUBLESHOOTING

If the device does not work properly, check whether you are
able to rectify the problem yourself. If the problem cannot
be solved with the steps below, contact the customer service
department.
The device does not work.
The mains plug is not inserted in the socket correctly.
► Correct the fit.
20
09813_Inlay_DE-EN-FR-NL_A6_V2.indb 20 09813_Inlay_DE-EN-FR-NL_A6_V2.indb 20

Replacement parts can be purchased via the following
website: www.dspro.de/kundenservice
Do not attempt to repair an electrical device your-
self!
24.08.2020 16:01:24 24.08.2020 16:01:24