Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Cambria 201, 201-DC, 203
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
Product must be installed in accordance with all National Electrical Code, Canadian Electrical Code, and all Local and
●
●
Provincial Codes.
Follow product label information and instructions before installing fixture. Retain installation instructions for future
●
●
reference.
Wiring and installation to be performed by a qualified electrician only. Turn OFF power before initial installation,
●
●
servicing and maintenance.
To reduce the risk of FIRE OR INJURY TO PERSONS: Lighted lamp is HOT! Turn OFF fixture and allow to cool before
●
●
replacing lamp. Do not touch hot lens, guard, or enclosure. Keep away from combustible materials. Do not touch the
lamp at any time. Use a clean, dry, soft cloth to handle the lamp. Oil from skin may damage the lamp.
Replace lamp only with correct wattage and type of lamp marked on label. DO NOT exceed the maximum wattage
●
●
listed on the fixture label.
Keep fixture lens area clear and free from debris as this may cause an unsafe condition.
●
●
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition and void
●
●
product warranty.
All gaskets, O-rings and sealing surfaces must be kept clean during installation and service; failure to do this may
●
●
cause an unsafe condition and void product warranty.
Use UL listed waterproof wire connectors when making electrical connections (recommended).
●
●
Replace removable parts after servicing.
●
●
SUITABLE FOR WET LOCATIONS.
●
●
SUITABLE FOR MOUNTING WITHIN 1.2M (4FT) OF GROUND.
●
●
ATTENTION: A remote transformer is required. For use with maximum 25A, 12V-15V power unit only. Fixture voltage
●
●
is 10V min - 13V max.
HARDWARE REQUIRED FOR INSTALLATION (PROVIDED BY OTHERS)
9/64" Allen Wrench
●
●
5/64" Allen Wrench
●
●
Wire connectors (recommend silicone filled outdoor rated wire connectors)
●
●
2
IMPORTANT LISTINGS AND CERTIFICATIONS SPECIFIC TO FIXTURE
Installation Instructions - Cambria 201, 201-DC, 203
ADL141228
WARNING
INSTRUCTIONS.
www.eaton.com
Publicité
